top of page

Timers & Control Relays

flag relay
Screenshot 2020-09-16 080302.png

For more information find part detail in PDF

Flag Relay

NEPEAN Power Flag Relays provide a latching that can be reset mechanically or electrically when required.


• Clear plastic housing, with Flag window to indicate tripped state
• Compatability with standard 11-pin relay configurations
• Vibration resistant electrical and/or mechanical reset facilities
• Relay will remain latched with the supply removed
• Plug in unit, standard 11-pin base
• 2-pole change over that resets via mechanical and/or electrical means
• ON pulse power 1.5VA/W
• OFF pulse power 0.5VA/W
• Min pulse length for ON/OFF control 50ms
• Max switching current 10A
• Peak inrush current (20ms) 30A
• Voltage tolerances: 80% to 100%
• Base mounting: Wall or Din Rail
• Ambiant temperature operation/storage: -30 to +60°C / -30 to +80°C
• Coil duty cycle DC - 3 minutes max
• AC - continuous

mini intermediate power relay
Screenshot 2020-09-16 081038.png

For more information find part detail in PDF

Miniature Intermediate Power Relay 

The NEPEAN Power Miniature Intermediate Power Relays are 4 pole change over contact plug-in relays for low energy switching applications. It is widely used in remote control, telemetry, communication, automatic control, mechatronics and power electronic equipment.


• High quality electronic circuit and integrated components with reliable quality
• Small volume, light weight, high sensitivity, long service life
• Led indicator, test button and dual polarity
• Gold plated contact available
• A switching capacity of 1.5kV dielectric strength between coil and contacts

Power Relays

Relay with FGC

relay with FGC
Screenshot 2020-09-16 081639.png

For more information find part detail in PDF

Relay with Forcibly

Guided Contacts

The NEPEAN Power relay with forcibly guided contacts is the most reliable way to ensure maximum safety for both person and machine. The N/O and N/C contacts of an elementary relay are connected to one another mechanically through forced guidance. This prevents N/O and N/C contacts from closing at the same time. In conjuction with a suitable circuit, failure to open can be reliably detected.


• Multi contact arrangements: 2NO+2NC, 3NO+1NC
• Forcibly guided contacts according to EN50205
• 6A switching capability
• Low input power: 360mW
• High insulation capability: 10kV surge voltage between input and output
• UL insulation system: Class F available
• Environmental friendly product (RoHS compliant)
• Outline dimensions: 40 x 13 x 24mm

bottom of page