Nepean Transformers
NEPEAN Power has the supply network to source a wide variety of transformers to suit most applications in the resource, industrial, network transmission, renewable energy and water industries. The types of transformers we have supplied to our clients are;
• Oil Filled Power Transformers
• Oil Filled Distribution Transformers
• Cast Resin Dry Type Transformers
• Nitrogen Filled Dry Type Transformers
• Oil Filled Underground Transformers
• Drive Type Transformers
The years we have invested into forging strong relationships with our manufacturing partners now give us the advantage of a very fast turnaround of products compared to our competition, and the ability to pass on considerable savings without compromising quality.
Advantages
• Rating and configuration suited specifically to your individual requirements
• Copper windings used in all transformers not aluminium
• Personalised design for individual applications
• Product supply only or turnkey solutions available
• Competitive Pricing and Fast Turn Around
• World class manufacturing and Quality Control standards
• Product supply only or turnkey solutions available
• ISO 9001:2015 Quality Certified
Cast Resin
Dry-type Transformer
NEPEAN Power’s epoxy resin cast dry transformers utilise the complete encapsulation of the primary and secondary windings to prevent penetration of moisture into windings and offer protection against adverse ambient conditions. These transformers can work without disruption of service at 100% humidity either indoors or outdoors.
Advantages
-
Personalised design for individual applications
-
Product supply only or turnkey solutions available
-
Competitive pricing and fast turnaround delivery
-
Proven in use locally
-
High temperature range epoxy
-
Full compliance with Australian and NZ Standards
-
World class manufacturing and Quality Control standards
-
ISO 9001:2015 Quality Certified
For more information find part detail in PDF
Oil Distribution Transformer
NEPEAN Power’s Oil Distribution Transformers are currently utilised in mining and in industrial applications.
They have been proven to be reliable and efficient at both high and low loads.
Advantages
-
Rating and configuration suited specifically to your individual requirements up to 35KV.
-
Copper windings used in all transformers not aluminium.
-
Personalised design for individual applications
-
Product supply only or turnkey solutions available
-
Competitive Pricing and Fast Turn Around
-
Proven in use locally.
-
Optional Hermetic sealing.
-
On load and Off Load Tapping available.
-
Optional fan cooling available.
-
Full compliance with Australian and NZ Standards.
-
World class manufacturing and Quality Control standards.
-
ISO 9001:2015 Quality Certified
For more information find part detail in PDF
Underground Nitrogen Transformer
Our NEPEAN Power Nitrogen Cooled Dry Type Transformers are designed to provide power delivery solutions in an underground environment where safety is of the highest importance.
Advantages
-
All Copper windings for efficiency gains and cooler operation
-
Removable sealed lid, not welded no cutting needed to service
-
Tanks are our design with transformers manufactured to our drawings
-
Low height or 5 limb designs
-
Optional water cooled tanks
-
Integral pressure monitoring with test facility
-
AS4871.3 compliant
-
Optional tertiary windings for multiple output voltages
-
Optional ExP protection to IEC60079 standards
-
International agent for Varelen Transformers
-
Product supply only or turnkey solutions available
-
Competitive Pricing and Fast Turn Around
For more information find part detail in PDF
Underground Oil Type Transformer
NEPEAN Power’s underground distribution transformer range can be supplied not only with a capacity rating but also in a size or shape suited specifically to your individual requirements.
Advantages
-
Extra bracing added to secure the core and windings during transportation
-
Local indication to remote monitoring capability
-
5-degree incline angle standard with up to 20-degree optional
-
All fittings can be stainless steel not aluminium
-
Must be AS4871.6 compliant
-
Optional Certified Lifting Points
-
PCB Free oils used and no ignition FR3 oil optional
-
Variable sizes available to suit application
-
Competitive pricing and fast turnaround delivery
-
Proven in use locally
-
World class manufacturing and Quality Control standards
-
Product supply only or turnkey solutions available
-
ISO 9001:2015 Quality Certified
For more information find part detail in PDF
Control Transformers
Control Trasformers
Control power transformers from NEPEAN Power set the industry standard for design innovation and performance.
They are designed with low impendence windings for excellent voltage regulation, and can accommodate the high inrush current associated with contractors, starters, solenoids and relays.
Transformers provide stepped down voltages to machine tool control devices enabling control circuits to be isolated from all power and lighting circuits. this allows the use of grounded or ungrounded circuits that are independent of the power of lighting grounds; greater safety is afforded to the operator. The control transformer line is particularly adaptable on applications where compact construction is demanded.
Features
• Single and Three Phase Transformers
• VA load for 50 to 100 kVA
• Input voltages 24V - 6600V
• Models available with Integral Fuse Blocks
• Earth Screen shields between windings
• Centre Tapp
• Optional Primary Tapp for regulation
• Class F Insulation (optional)
For more information find part detail in PDF
Constant Voltage Transformers
The NEPEAN Power Constant Voltage Transformer has a wide application, particularly where reliability and inherent regulating ability against line voltage changes are of prime importance. The output of the constant-voltage transformer is essentially a square wave, which is desirable for rectifier output applications while, also having good circuit characteristics.
Features
• Bottom plate is built of powder coated steel. Thickness is 1.5mm.
• Mounting holes are unknown and subject to customer’s confirmation.
• Length and gauge of wires suit the transformer.
• Weight of the whole asm is around 15KGS.
For more information find part detail in PDF
11kV Voltage Transformers
These voltage transformers are cast epoxy resin insulated and fully enclosed. They are suitable for use for metering, voltage control and relay protection supplies. Designed for Australian compliance of 50Hz and a rated voltage of 11kV (3.3kV, 7.6kV and 22kV versions are also available).
The voltage transformers comply to AS1243, AS60044.2, IEC60044.2, GB1207 along with other international standards.
Each phase is with fusible cut-out protection sized to match the transformer short circuit energy. Each unit is partial discharge tested in accordance with the requirements of AS4871.
Features of Single Phase Transformer
Indoor Service
Frequency
Insulating Material
Altitude
Rated Voltage Ratio
Rated Power
Number of Phases
Um
Insulation Level
PT with fuse in primary winding
Type of Manufacture
50Hz
Epoxy Resin
<1000m
11/0.11kV (with earth screen)
1000VA per phase
Single Phase
12kV
12/42/75kV
XRNP-12/0.5-50
T19-1-1CT-1ES
Features of Three Phase Transformer
Indoor Service
Frequency
Insulating Material
Altitude
Rated Voltage Ratio
Rated Power
Number of Phases
Um
Insulation Level
PT with fuse in primary winding
Type of Manufacture
50Hz
Epoxy Resin
<1000m
11/0.11kV (with earth screen)
2250VA (750VA per phase)
Three Phase
12kV
12/42/75kV
XRNP-12/0.5-50
T19-2.2-3YY-1ES
For more information find part detail in PDF
Generators
Diesel Powered Generators
NEPEAN Power is the exclusive agent in Australia for the Mega power range of industrial generators. These generators have been proven in the field worldwide in both backup systems or in continuous working roles.
Advantages
-
Service packages and extended warranties available
-
Remote monitoring of engine ignition system and alternator winding and bearing temperature
-
Option of engine manufacturer – MTU, Perkins, Cummins, Mitsubishi or Deutz
-
MDG15 and AS/NZ 4871.6 compliant with Mining NER optional
-
50-degree temperature and 30% humidity rated
-
On Board Diesel Tank and pumps with remote fill option
-
Electric Auto start with key interlocking battery isolator
-
Optional integral fire suppression
-
Tier 2 Catalytic Conversion
-
11kV PT and CT’s optional
-
Independently audited
-
Optional synchronization for multiple units
-
Low noise options
For more information find part detail in PDF