top of page

1.1kV Phase Indicator

  • The X0347 Phase indicator works by connecting directly between each phase terminal and earth and has an operating voltage from 300V up to 1500V (Phase to earth)

  • Two red LEDs on the unit itself indicate the presence of voltage

  • Connection to phase via flying lead – approx. 1m in length

  • There is also a terminal available for connecting a 24V external LED indicator (17mA max)

  • Designed to be cable tied around a conductor it can also be mounted using screw terminals (be aware - one terminal cannot be tightened due to connector Earth & External LED connector)

  • Physical dimensions:  42 x 42 x42mm (excluding the mounting tabs)

  • Connection to Earth & External (optional) LED Indicator – Terminal block

bottom of page