Sloped Roof Enclosures
The MBS Sloped Roof Enclosure in stainless steel has been designed to endure the most rugged & demanding environments. Typically suited to mining & industrial applications, the enclosure is flange mounted and comes complete with mounting pan and earth strap.
Features
• IP66 - Complete protection from dust, oil, and other non-corrosive material
• Grade 316 Stainless Steel provides superior corrosion and heat resistance
• Heavy duty body construction - 1.5mm
• Internal C Rails
• 30 degree sloped roof / 5mm over hang
• Flange mounted
• Concealed stainless steel hinges
• Fully welded construction
• Polyurethane gasket
• 8mm Stainless Steel square drive spanner lock
• Mounting pan 2mm powder coated white mild steel
• Earth strap kit included
For more information find part detail in PDF
Flat Roof Enclosures
The PTX general purpose wall mount in stainless steel is the ‘staple’ industrial product in our range. A high quality enclosure built for harsh industrial applications.
Features
• The foam PU sealing gasket makes sure the enclosure reaches protection grade IP66 level
• Grade 316 Stainless Steel provides superior corrosion and heat resistance
• Heavy duty body construction - 1.5mm
• Extended border hinges ensures high intensity of the system
• Galvanised mouting plate amd high intensity installation support bars ensure liability of installation
• The gland plate makes for convenience and flexibility of inlet and outlet wiring cables
• Wire drawing finish on the surface
• 8mm Stainless Steel square drive spanner lock
• Mounting pan 2mm powder coated white mild steel
• Earth strap kit included
For more information find part detail in PDF
Enclosures & Climate Control
Bay Enclosures
The bay enclosure system is extremely versatile and simple to install. The main structure is welded
with overall section bars, which ensures the enclosure reaches high protection grade.
Features
• Protection grade: IP55 to EN60529 NEMA4.
• Surface: the cabinet is phosphate coated and the exterior is epoxy thermosetting textured powder-coated.
• Material: the cabinet body is cold-rolled sheet steel, the mounting plate is galvanised.
• Thickness: Front door - 2mm. Body, back and inside panel are 1.5mm. Mounting plate - 2.5mm.
• Double doors in both left and right sides. Specific tube of the door strengthens system and brings higher durability.
• The rectangle frame not only reinforces the front door, but can also be used to install the electronic components.
• The crossing-lock, secures the front door with three points by up, middle and down.
• The back and side plate are easily removable and the back plate can be switched with the front door.
• The foam PU sealing gasket inside the plates makes the enclosure resistant to water and dust.
• Colour: RAL7032 RAL 7035.
For more information find part detail in PDF
Network Cabinet
The wall mounted cabinet uses advanced technology and precise measurements. With its reliable structure, static loading capacity up to 60kg. A 120mm size fan can also be installed at top of cabinet. Side door can be fixed with a lock or removed. Our cabinet complies with ANSI/EIA:RS-310-D:IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standards and ETSI standard.
A variety of sizes are available and requests for custom orders are welcome.
Features
• Modular design, many choices for front door available.
• 19” inch single section wall cabinet, quick and easy to wall mount.
• Front glass door and side doors easy to assemble and disassemble.
• Cable is accessible from top and bottom.
• According to customer requirement, the sizes can range from 4U to 27U.
• The 19” profiles are removable and adjustable.
• Allow flat packing, saving more space and freight.
• Material : SPCC cold rolled steel.
• Thickness: mounting profile 1.5mm, the others:1.0-1.2mm
• Colour: RAL9004(Black);RAL7035( Grey)
For more information find part detail in PDF
Filter Fans
The NEPEAN Power range of filter fans offer a superior solution for enclosure ventilation. Our functional design offers reduced installation depth to allow use within small spaces. With an extended service life, these fans prove to be durable and require minimal maintenance. Available in various voltages, our range is suitable for use across a multitude of industry requirements.
For more information find part detail in PDF
Heater & Thermostat
DIN Mounted Heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design.
Features
• Low surface temperature
• Quick mounting due to clip fixing
• Double Insulated (plastic)
• Wide voltage range
• Small size
For more information find part detail in PDF
Enclosure Hardware
NEPEAN Power offers cubicle rubber is a range of different shapes and sizes. Length is custom and should be specified when ordering.
For more information find part detail in PDF
Door Hardware
NEPEAN Power’s door hardware includes both door handles and hinges with products suitable for applications across a variety of industries. Our door hardware is manufactured with a focus on functionality and durability.
For more information find part detail in PDF
Zink Lockable Door Handle
Stainless steel Hinge lock
Chrome Plated Hinge
Reflective Decals
The NEPEAN Power Reflective Decals offer industry leading retroreflectivity, conspicuity and legibility
because of their highly efficient retroreflective optics. Using Diamond Grade 3M 4090 materials, it helps
improve safety by providing higher luminance values at distances most critical to users. With a service life of 10 years, these decals are a necessity for a wide range of industrial and commercial uses.
For more information find part detail in PDF
• 3M Diamond Grade 4090
• Performs at high observation angles and wide entrance angles
• Helps overcome reduced sign illumination from
VOA headlights
• Offers excellent life-cycle value
• Short, medium and long sight distances
• Available in a full range of sizes and variations
Features
Internal
Decals
External
Decals