Live Line & Signalling
1kV Phase Indicator


X0347 (Cable Mount) Features
• The X0347 Phase Indicator works by connecting directly between each phase terminal and earth and has an operating voltage from 300V up to 1500V (phase to earth)
• Two red LEDs on the unit itself indicate the presence of voltage
• Connection to phase via flying lead – approx. 1m in length
• There is also a terminal available for connecting a external LED indicator
• Designed to be cable tied around a conductor it can also be mounted using screw terminals – just need to be aware one terminal cannot be tightened due to connector Earth & External LED connector
• Physical dimensions: 42 x 42 x 42mm (excluding the mounting tabs)
• Connection to Earth & External (optional) LED Indicator – Terminal block
For more information find part detail in PDF
Phase Condition Indicator

Standard 48Q swithcboard case
• Front panel mount
• 1000V input voltage
• 3 LED indicators for L1, L2 and L3
• 2 LED indicators for correct (1-2-3) and incorrect (3-2-1)
• Available option include IP55 cover
• Internal replacable fuses
For more information find part detail in PDF
HV Phase Indicator
X0452 (Panel Mount) Features
• Can display 3 phases
• 3.6kV to 40.5kV
• Inductively Connected to each phase via coils
• Three red LEDs on the unit itself indicate the presence of voltage
• Physical dimensions: 70 x 35 x 33mm
• Cutout dimensions: 55 x 32mm
• Mounting hole dimensions: ɸ3.4mm x 2 (distance 64mm)
• Suitable for operation in temperatures between -25°C and 55°C

For more information find part detail in PDF
Live Line Indicator
Innovation . Dedication . Specialisation
The X0276 Live Line Indicator (LLI) module is a non-contact, 3-phase, voltage sensing unit used in sensing the presence of voltage on a phase. The presence or absence of voltage is indicated via the front LED’s or externally connected panel mount LED’s.
Due to the non-contact method of detecting voltage, this unit should not be used to prove voltage is present or absent in the determination of safety or life critical situations.
Features
For more information find part detail in PDF

Strobe Sounder

The NEPEAN Power Strobe Sounder is a conventional, combined sound and strobe beacon. The strobe sounder is suitable for outdoor applications with an IP65 rating. The Strobe Sounder is designed for external use, having a composite of polycarbonate and ABS plastic making it both durable and weather resistant. Further weather resistance comes from the internal circuit coating used to resist moisture. This strobe sounder uses high brightness LED’s and a durable piezoelectric transducer.
For more information find part detail in PDF
• Designed for outdoor use
• Easy to wire and install
• Strobe and alarm type is configurable
• Distinguishable alarms can be set for different types of emergencies
• Adjustable volume